Page Comparison

...

1. In a new rack, load the “Audio Envelope Follower” (under “Modules” > “Event Generators”
2. in the Audio Envelope Follwer, select the desired midi note to trigger
3. Insert a multisampler below (or use your existing multisampler)
4. Insert a sample at the desired Note
5. Now go to “Modular” View in the main window
6. Double click the module “Audio File” and route its output (“output to”) to send its signal to the rack which contains the envelope follower.
7. Now you get a signal into the envelope follower. Set the values in the envelope follower to achieve the desired behaviour (loudness triggers event).
8. You can also use bandpass filters to “look” for specific frequencies to trigger the follower! Eg to create a “singing interface” which triggers if a specific pitch is sung.
9. Now you can insert a send on top of the rack, and send the audio signal to a second rack. Like this you can make the original signal audible together with the triggered sample, if desired. You can of course then apply processing to the sent signal as well.